Features:

• Multi-functional All-in-One device (AC-DC Charger + DC-AC Inverter for Load + AC Bypass for Load)
• Built-in AC-DC high power charger up to 4520W
• DC-AC pure sine wave output (THD<3%)
• Instantaneous peak power of up to 10KW for AC output
• Up to 6 units of AC output can be paralleled, expanding wattage up to 30KW (5+1 units)
• Utilizes 3 NTN-5K unidirectional AC outputs, configurable for 3Ø4W usage
• -30+70℃ ultra-wide temperature range, suitable for global deployment or installation in enclosed environments
• Built-in remote ON/OFF control
• Protections:
  • DC input: Reverse Polarity, Low Voltage Warning and Shutdown, Over Voltage, Battery Over Discharge
  • AC output: Short Circuit, Overload, Over Temperature
• Built-in Modbus or CAN bus communication monitoring
• Optional intelligent controllers available for purchase:
  • CMU2E (Stand-Alone Vertical Mounting / Rail Mounting) or CMU2E-R (Rack System Installation)
• Dimensions (length x width x height): 460 x 211 x 83.5mm
• PCB coating for basic moisture/dust / dirt protection
• Certifications: CB / TUV / RCM / EAC / CE / UKCA / FCC
• Compatible with lead acid or lithium batteries
• 5 years warranty

General Specification

DC input voltage range

(19 ~ 33Vdc) (38 ~ 66Vdc)

AC output frequency

The default setting set at 50±0.1Hz

50/60Hz selectable by DIP S.W

LOW & HIGH

ALARM, SHUTDOWN, RESTART

Reverse Polarity

No damage, re-power on to recover after fault condition is removed

Over Temperature

Shut down o/p voltage, recovers automatically after temperature goes down

Output Short

Shut down the o/p voltage, and re-power it to recover

OVERLOAD (Typ.)

105 - 115% load for 180 sec., 115% - 150% load for 10 sec.

Protection type: Shut down o/p voltage, re-power on to recover

Remote Control

Power ON-OFF remote control by front panel dry contact connector(by RELAY), Open : Remote off ; Short: Normal work

Communication

MODBus-RTU (RS-485) / CANBus

Withstand voltage

(DC I/P - AC:3.0KVAC) (AC - FG:1.5KVAC)

Working temperature

-30 ~ +70℃(Refer to “Derating curve”)

Safety standards

CB IEC62368-1, CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004 approved

Dimension (LxWxH)

460x211x83.5mm